挤出机专用减速机,挤出机齿轮箱-常州传动机械有限公司。
全国咨询热线:13313028229
当前位置:首页>>新闻资讯

圆弧齿蜗轮蜗杆减速机

网址:www.huiguangcn.com时间:2024-03-22 17:36:06(部分内容来源于网络,不代表本站观点)

圆弧齿蜗轮蜗杆减速机提升承载能力方法一直是大家比较关注的问题,我们根据自己多年的生产经验总结了三个方法与您共享一下。

1. Adjust the position of the worm gear: The use of side contact is to naturally form an "artificial oil culvert" on the bite side and make full use of the Angle of the bite side line contact and sliding speed.
一、调整蜗轮的位置:采用要出侧接触,是咬入侧自然形成“人工油涵”并充分利用咬合侧线接触与滑动速度的夹角Ω大的特点。

Generally, the bite side contact area accounts for 30%-40% of the whole tooth surface.
一般是咬出侧接触面积占全齿面的30%-40%。

Second, to eliminate the adverse bite parts: the ordinary screw lift worm gear box, in the middle of the gear tooth biased root area is not the use of dynamic pressure oil grinding formed in this area, often early damage occurs in this area.
二、消除不利的咬合部位:普通丝杠升降机蜗轮箱,在轮齿中间偏齿根一带是不利用动压油磨形成的区域,往往在此区域内发生早期破坏。

By adjusting the number of teeth and spacing position of worm gear, the degree of bite, so as to improve the bearing capacity of the reducer and expand its range of use.
通过调整蜗轮的齿数和间距位置,咬合程度,从而都能提高减速机的承载能力和扩大其使用范围。

微信扫一扫

在线客服
联系方式

咨询热线

13313028229

微信

13313028229

上班时间

周一到周六8:30-5:00

二维码
线